Products

2
Yes
None
1
1000000
Name...
/products/
Thumbnail
Sort By:

Categories:

Accessories
Leader Cable Fibre Glass 4.5mm
Leader Cable Fibre Glass 4.5mm Image

Replacement 4.5mm Fibre Glass Rod.

A lightweight fibre-glass rod used for guiding the leader cable into the pipe. The low friction fish tape allows for smooth entrance into the pipe.

Features

  • Double ended rod allowing quick swap over.
  • Stitched and riveted for additional strength.
  • Low friction epoxy coating ensure the fish tape negotiate water pipes effectively.
  • Fibre glass construction provides correct stiffness to insert rod the maximum length.
  • Will negotiate bends with radii as small as 150mm (6”) this increasing change to install cables.
Leader Cable Low Friction
Leader Cable Low Friction Image

Low friction rod used for quick installation of the leader cable.

A lightweight low friction rod used for guiding the leader cable into the pipe. The smooth coated rod slides through the pipe with ease.

Features

  • Double ended rod allowing quick swap over.
  • Will negotiate bends with radii as small as 150mm (6”) thus increasing the chance of a successful installation.
  • Very low friction.
  • Coated rod allows for smooth entry into the pipe.
  • Material provides the correct stiffness to insert rod at maximum length whilst maintaining flexibility.
Leader Cable Steel
Leader Cable Steel Image

This lightweight, sturdy steel cable guides the pulling cable, allowing it to enter the pipe smoothly. Nylon coated to reduce friction and prevent damage, the leader cable is used for easy cable installation with the KOBUS Pipe Puller or hand winch.

Features

  • Double ended to last twice as long.
  • Nylon coated to protect cable and reduce friction.
  • Short connectors to negotiate around tight bends.
  • Connects to all standard leader cables with M5 Male connectors.
  • Will fit with all KOBUS Pipe Pullers and hand winches.
Spring Loaded Head
Spring Loaded Head Image

Spring Loaded Head attach to Fish Tape.

A low friction, detachable head, used with a fish tape to manoeuvre through pipe bends and fittings. Supplied in various sizes to ensure maximum installation success.

Features

  • Low friction bronze bullet designed to negotiate water pipe bends and fittings.
  • Variable sizes for different cables thus ensuring cable will fit in pipe.
  • Spring loaded head negotiates around tight bends.
  • Quick and removable to swap with leader cable.
Towing Head 25mm
Towing Head 25mm Image

Towing Head connect old pipe to new 25mm MDPE and pull pipe into ground.

The towing head attaches to the pulling cable and the end of a piece of 25mm MDPE pipe allowing it to be pulled. The steel eyebolts have a high maximum break-load and the proven tooth profile gives higher gripping power.

Features

  • High Tensile Drop Forged Steel Eyebolts will not break when pulling new pipe in place.
  • Proven Tooth Profile for high gripping power.
  • Quick and secure fit to new pipe, making a connection stronger than the pipe itself.
  • Connection ensures that no soil enters new pipe and help comply to water hygiene.
  • Available in all varied sizes for different pipes.
Towing Head 32mm
Towing Head 32mm Image

Towing Head connect old pipe to new 32mm MDPE and pull pipe into ground.

The towing head attaches to the pulling cable and the end of a piece of 32mm MDPE pipe allowing it to be pulled. The steel eyebolts have a high maximum break-load and the proven tooth profile gives higher gripping power.

Features

  • High Tensile Drop Forged Steel Eyebolts will not break when pulling new pipe in place.
  • Proven Tooth Profile for high gripping power.
  • Quick and secure fit to new pipe, making a connection stronger than the pipe itself.
  • Connection ensures that no soil enters new pipe and help comply to water hygiene.
  • Available in all varied sizes for different pipes.
Towing Head Eyebolt 25mm
Towing Head Eyebolt 25mm Image

Replacement eyebolt for 25mm towing head.

Eyebolts fitted in the 25mm towing head are forged from a single piece of high tensile alloy steel. This gives them extra strength, in great excess of the breaking load of the pipe.

Features

  • High Tensile Drop Forged Steel Eyebolts will not break when pulling new pipe in place.
Towing Head Eyebolt 32mm
Towing Head Eyebolt 32mm Image

Replacement eyebolt for 32mm towing head.

Eyebolts fitted in the 32mm towing head are forged from a single piece of high tensile alloy steel. This gives them extra strength, in great excess of the breaking load of the pipe.

  • High Tensile Drop Forged Steel Eyebolts will not break when pulling new pipe in place.
Long Loop Shackle
Long Loop Shackle Image

Connects the towing head to the burster head

Forming a link between the towing head and burster head, this long loop shackle quickly connects the new pipe to the existing pipe without any additional tools.

Features

  • Allows the the new pipe to freely bend in all directions.
  • Hand tightened so that no tools are required to make or remove connection.
32mm Expander
32mm Expander Image

32mm Expander used for installing 32mm diameter pipes.

A robust, reusable expander designed to create extra access in the ground for larger diameter pipe installation. The hardwearing expander fits between the burster head and the pipe and allows for a bursting size of 32mm OD, creating an unobstructed path to insert the new pipe without damage.

Features

  • Slots onto a range of pipes with ease.
  • Robust.
  • Compatible with all KOBUS burster head sizes.
  • Reusable.
  • Provides an unobstructed path for larger diameter pipes to be inserted.
  • Increases the bursting size to 32mm OD.
KOBITE Dispensing Gun
KOBITE Dispensing Gun Image

Injects KOBITE into the pipe through the burster head.

A portable, low-maintenance, manual dispensing gun designed for smooth injection of the Kobite. This robust applicator, cleverly designed to eliminate leakage, delivers incredible pushing force ensuring fast completion – Kobite can be injected within 10 seconds.

Features

  • Total enclosure system eliminate all leakage.
  • Patented piston compresses entire cartridge and has no contact with KOBITE.
  • Fast reload ensuring multiple cartridges can be injected within allowed curing time.
  • No cleaning required between uses.
  • Fast action – injects entire cartridge within 10 seconds.
Dispensing Gun Ring
Dispensing Gun Ring Image

Replacement closure ring for the KOBITE dispensing gun.

An easy to fit, detachable ring for the Kobite Dispensing Gun that offers protection to the Kobite cartridge.

Features

  • Leather washer to give best support and protection to cartridge.
  • Double notch fixing i.s.o. screw thread for ultra fast assembly.
Support Boards (Set)
Support Boards (Set) Image

Plastic support boards provide support for the KOBUS Pipe Puller.

PSB offer a lightweight solution to the heavy duty application of supporting the KOBUS Pipe Puller in the ground when in operation. PSB are stronger than timber boards and come complete with ergonomic rope handles, enhancing the ease of handling.

Features

  • Impermeable to water, thus withstanding site conditions.
  • Stronger than timber boards.
  • Strong rope handles allow for easy handling
  • Easy to clean and maintain.
  • Supplied in a set of 3.
  • 3 piece set allows for variations of use on site.
Accessories
Leader Cable Fibre Glass 4.5mm Image
Leader Cable Fibre Glass 4.5mm
Replacement 4.5mm Fibre Glass Rod. A lightweight fibre-glass rod used for guiding the leader cable into the pipe. The low friction fish tape allows for smooth entrance into the pipe. Features Double ended rod allowing quick swap over. Stitched and rivete... Read More
Leader Cable Low Friction Image
Leader Cable Low Friction
Low friction rod used for quick installation of the leader cable. A lightweight low friction rod used for guiding the leader cable into the pipe. The smooth coated rod slides through the pipe with ease. Features Double ended rod allowing quick swap over. ... Read More
Leader Cable Steel Image
Leader Cable Steel
This lightweight, sturdy steel cable guides the pulling cable, allowing it to enter the pipe smoothly. Nylon coated to reduce friction and prevent damage, the leader cable is used for easy cable installation with the KOBUS Pipe Puller or hand winch. Features Double ende... Read More
Spring Loaded Head Image
Spring Loaded Head
Spring Loaded Head attach to Fish Tape. A low friction, detachable head, used with a fish tape to manoeuvre through pipe bends and fittings. Supplied in various sizes to ensure maximum installation success. Features Low friction bronze bullet designed to negotiat... Read More
Towing Head 25mm Image
Towing Head 25mm
Towing Head connect old pipe to new 25mm MDPE and pull pipe into ground. The towing head attaches to the pulling cable and the end of a piece of 25mm MDPE pipe allowing it to be pulled. The steel eyebolts have a high maximum break-load and the proven tooth profile gives higher gripping pow... Read More
Towing Head 32mm Image
Towing Head 32mm
Towing Head connect old pipe to new 32mm MDPE and pull pipe into ground. The towing head attaches to the pulling cable and the end of a piece of 32mm MDPE pipe allowing it to be pulled. The steel eyebolts have a high maximum break-load and the proven tooth profile gives higher gripping pow... Read More
Towing Head Eyebolt 25mm Image
Towing Head Eyebolt 25mm
Replacement eyebolt for 25mm towing head. Eyebolts fitted in the 25mm towing head are forged from a single piece of high tensile alloy steel. This gives them extra strength, in great excess of the breaking load of the pipe. Features High Tensile Drop Forged Steel... Read More
Towing Head Eyebolt 32mm Image
Towing Head Eyebolt 32mm
Replacement eyebolt for 32mm towing head. Eyebolts fitted in the 32mm towing head are forged from a single piece of high tensile alloy steel. This gives them extra strength, in great excess of the breaking load of the pipe. High Tensile Drop Forged Steel Eyebolts will not brea... Read More
Long Loop Shackle Image
Long Loop Shackle
Connects the towing head to the burster head Forming a link between the towing head and burster head, this long loop shackle quickly connects the new pipe to the existing pipe without any additional tools. Features Allows the the new pipe to freely bend in all di... Read More
32mm Expander Image
32mm Expander
32mm Expander used for installing 32mm diameter pipes. A robust, reusable expander designed to create extra access in the ground for larger diameter pipe installation. The hardwearing expander fits between the burster head and the pipe and allows for a bursting size of 32mm OD, creating an... Read More
KOBITE Dispensing Gun Image
KOBITE Dispensing Gun
Injects KOBITE into the pipe through the burster head. A portable, low-maintenance, manual dispensing gun designed for smooth injection of the Kobite. This robust applicator, cleverly designed to eliminate leakage, delivers incredible pushing force ensuring fast completion – Kobite can b... Read More
Dispensing Gun Ring Image
Dispensing Gun Ring
Replacement closure ring for the KOBITE dispensing gun. An easy to fit, detachable ring for the Kobite Dispensing Gun that offers protection to the Kobite cartridge. Features Leather washer to give best support and protection to cartridge. Double notch f... Read More
Support Boards (Set) Image
Support Boards (Set)
Plastic support boards provide support for the KOBUS Pipe Puller. PSB offer a lightweight solution to the heavy duty application of supporting the KOBUS Pipe Puller in the ground when in operation. PSB are stronger than timber boards and come complete with ergonomic rope handles, enhancing... Read More